Overview:
Should the grid-fed energy-saving battery testing equipment is an exclusive product launched in China after years of research and development by Semco Infratech Pvt. Ltd. PWM high-frequency power feedback technology? The latest generation of energy-saving battery testing equipment is widely used in the chemical composition and volumetric testing of lithium-ion batteries and nickel-metal hydride and nickel-cadmium batteries. Should Product stability, energy saving, precision, and quality have been welcomed and praised by many battery industries? The overall technology is currently at the leading domestic level and is leading the technological revolution of the battery industry.
Structure And Appearance: The structure of this equipment is mainly composed of the following parts:
- 1 CPU board, the whole cabinet is sent and controlled uniformly.
- There are 24 four-channel constant-current plates, evenly arranged in four doors.
- There are 4 bidirectional inverter power supplies, each for 6 constant current boards.
- 2 keyboard boards, front and back double-sided operation.
- Common twenty-four Block pallet, pallet depth 25cm, with epoxy board insulation, each pallet 4 channel, alligator clip 60cm lead.
System Structure And Working Principle:
System Composition:
- Lithium battery into capacity equipment (1~10tower).
- A computer with a USB interface (bring your own).
- A USB to 485 interface converter and communication line.
- A set of SEMCO product software.
System Principle: The equipment is connected and controlled by a computer to send instructions and collect data; the keyboard can manually operate the equipment to display parameters and status; the constant current board is ordered by the CPU, and has constant current and constant voltage functions; when the battery is charged, the bidirectional power supply converts the alternating current into 12V direct current, and the constant current board realizes the charging control and detection of the battery; when the battery is discharged, the process is opposite to the charging process, and the constant current The board increases the battery voltage to 12V, and then converts the direct current into alternating current through the bidirectional power supply and directly feeds it into the factory’s alternating current distribution network, thereby realizing the energy feedback of the battery discharge electric energy.
Significant Power Saving Effect: After testing, Should The power consumption of the device during charging is more than 40% lower than that of traditional devices, the comprehensive power saving rate is more than 60%, and the power consumption is more than 60%, which saves a lot of costs for battery manufacturers.
Main Technical Parameters:
| Equipment Structure: | |
| Number of device channels | The whole machine has a total of 96 channels |
| Dimensions | Width 1680mm × Depth 550mm × Height
1840mm |
| Chassis color | Standard off-white (can be customized) |
| Fixture form | Terminal block + alligator clip |
| Fixture spacing | 150mm |
| Support battery specifications | Polymer battery, prismatic battery (with tabs) |
| Working power Supply | Three-phase five-wire system AC380V±10%, 50HZ |
| Power factor | ≥0.99 |
| AC current distortion rate | ≤5% |
| Feeder conversion efficiency | ≥70% |
| Overall Charging efficiency | ≥75% |
| Working power consumption | ≤15kW |
| Equipment failure rate | <1% |
| Working environment | temperature-10~40, Relative humidity 80% |
| Cooling method | Natural air intake, upward exhaust |
| Channel Parameters: | |
| Voltage measurement range | DC 0~5V |
| battery voltage range | Charge DC 0~4.5V; discharge DC 4.5~2V |
| Constant voltage range | DC 1〜5V |
| Voltage accuracy | ±(1‰Reading +1‰full scale), resolution 1mV |
| Voltage stability | ≤1‰ |
| Current Range | Charging DC 300mA〜30A; Discharging DC 300mA〜30A |
| Current accuracy | ±(1‰Reading +1‰full scale), resolution 10mA |
| Current stable Read | ≤1‰ |
| Software Function: | |
| Way to Control | Computer control equipment work, whole cabinet control |
| Communication method | Serial port, baud rate 57600 |
| Process settings | Up to 32 steps and 256 cycles can be set, with nested cycle function |
| Charging mode | Constant current, constant voltage, constant current and constant voltage |
| Charging cut-off condition | Voltage, current, time, capacity |
| Discharge mode | constant current |
| Discharge cut-off condition | voltage, time, capacity |
|
Protective function |
Over-voltage, under-voltage, over-current, under-current, over-capacity protection, power-off protection, data breakpoint recovery |
| Time limit | 0〜30000 minutes/step, the time unit is min |
| Time precision | ≤±1‰ |
| Sampling inspection cycle | ≤1s〜60s optional |
| Battery sorting | Sort by (capacity, time, open circuit voltage, discharge platform, etc.) |
| Data processing | It can record data such as voltage, current, time, capacity, etc., automatically calculate constant current charging ratio, capacity loss discharge efficiency, average voltage, medium voltage, and other data, provide data curves and cycle diagrams; can output generated text, EXCEL, WORD or MDB database format file |
Product Accessories:
| S.No. | Name | Quantity |
| 1 | Equipment factory inspection report | 1 set/unit |
| 2 | Equipment Instruction Manual | 1 set |
| 3 | Packing list and product certificate | 1 set/unit |
| 4 | Communication line | 1 set/unit |
| 5 | Product Software U Disk | 1 set |
Service And Support:
- After-sales on-site installation, commissioning and
- Shelf life1Year, 1 Year of free maintenance, upgrades and
- Available within the warranty period of 48h On-site maintenance service, Special circumstances will be discussed separately.
- Maintenance after the warranty period only charges the cost of raw materials, and the software is upgraded free of charge.